Hairstyles from the 1970s were a reflection of the era’s carefree and eclectic spirit. The decade was characterized by long, natural locks, bold and colorful hairstyles, and an overall free-spirited attitude towards hair. In this article, we will delve into the most iconic and memorable hairstyles from the 70s and how they have influenced hair trends in the decades since.

H1: Introduction to 70s Hairstyles

The 1970s was a time of social, cultural, and political change. This was reflected in the hairstyles of the time, which were a reflection of the era’s desire for freedom and individuality. The 70s was the decade of the hippie movement, and hairstyles were a way to express individuality and show one’s stance on social issues. Hair was worn long and natural, with loose, flowing locks that were often adorned with flowers, beads, or other bohemian accessories.

H2: The Farrah Fawcett Flip

One of the most iconic hairstyles of the 70s was the Farrah Fawcett flip. This hairstyle was made famous by actress Farrah Fawcett and was characterized by its long, feathered layers that were styled into a bouncy flip at the ends. The Farrah Fawcett flip was achieved by blow-drying the hair with a round brush and then using a flat iron to flip the ends. This hairstyle was popular among women of all ages and was a staple of the 70s.

H3: The Afro

The Afro was another popular hairstyle of the 70s and was worn by many African Americans as a symbol of pride and a rejection of the dominant society’s Eurocentric standards of beauty. The Afro was achieved by allowing the natural hair to grow out and then shaping it into a large, round ball of hair. The Afro was often styled with a pick or comb to add height and volume.

H2: The Shag

The shag was another popular hairstyle of the 70s and was characterized by its choppy, layered look. The shag was achieved by cutting the hair into uneven layers and then using a razor to create choppy, textured ends. This hairstyle was popular among both men and women and was often paired with bangs or a side part.

H3: The Mullet

The mullet was a hairstyle that was popular among men in the 70s and was characterized by its short back and sides and long, flowing locks in the back. This hairstyle was often paired with a mustache and was a staple of the disco era. The mullet was seen as a symbol of masculinity and was worn by many celebrities, including David Bowie, Elvis Presley, and Billy Ray Cyrus.

H2: The Bob

The bob was another popular hairstyle of the 70s and was characterized by its chin-length cut and straight, sleek look. The bob was often styled with a side part and was a popular choice among women who wanted a low-maintenance hairstyle. The bob was a versatile hairstyle that could be worn straight or curled and was popular among women of all ages.

Conclusion:

The hairstyles of the 70s were a reflection of the era’s free-spirited and eclectic attitude towards hair. From the Farrah Fawcett flip to the Afro, the shag, and the mullet, the hairstyles of the 70s were bold, unique, and memorable. These hairstyles have since inspired hair trends in the decades that followed and are still celebrated today for their bold, daring.

Georg Luger, who invented the 9mm Parabellum round, had military contracts for his company, DWM, in mind when he developed the Model 1900 Parabellum handgun in 1902. It took old Georg nearly ten years of rejections from significant military weaponry customers before DWM’s P08 “Luger” ultimately worked. The cartridge is now so widely used that its common name, “9 mil,” is as ubiquitous as Coke and Kleenex.

Ruger vs. SIG MPX K PC Charger
Have you recently heard of a “Parabellum”? John Wick III, for sure. If you haven’t recently reviewed your Latin, “Si vis pacem, para bellum” has been around for quite some time. Its literal translation is “If you seek peace, prepare for battle,” and it served as DWM’s corporate motto when the German firm elevated Georg Luger from the accounting division to the creation and sale of firearms. The term “Parabellum” was given to firearms and ammunition as a branding designation, similar to what “It’s the Real Thing” meant for Coca-Cola in the 1970s.

It doesn’t take much imagination to change that mentality to “If you want security, be prepared to fight” in light of recent events. In comparison to riots, killings, and mayhem, a few weeks of COVID-19 chaos seem quite mild now.

It’s time to start considering a PDW if you’re prepared to flex your parabellum. Both the MPX K and PC Charger from Sig Sauer and Ruger are excellent pistol-caliber carbines.

PC Charger Made by Ruger
I was able to get my hands on a PC Charger a few weeks before it was made public, and I’ve been using it vigorously ever since. To operate Ruger SR-Series magazines or Glock magazines, the PC Charger ships from the factory with a few magazine well inserts. At shopruger.com, you can also order a Ruger American Pistol magwell insert. When I initially took the PC Charger out of the package, I switched out the inserts to run Glock magazines. I virtually always carry a G19, therefore it made perfect sense to equip the new Ruger to use compatible magazines. I received a few 30-round, non-name-brand stick magazines that are compatible with Glocks from a friend, and they function flawlessly.

The magazine release button must stay on the left side of the handgun as it was sent from the factory for older Glock magazines with only one magazine latch hole to work with the PC Charger. When using this kind of magazine, do not reverse the mag release button since the magazine won’t lock into place properly. The PC Charger will not work with early models of Glock-brand magazines that have a “U”-shaped notch at the back of the magazine feed lips.

The chassis system of this rig is made of glass-filled polymer and is compatible with common AR grips. Even better, the integrated rear Picatinny rail made of 7075-T6 aluminium enables for the attachment of rail brace mounts in the Picatinny style. An SB Tactical folding brace was installed. The chassis design contains integrated rear-mounted QD cups for sling attachment as well as a flared magazine well for better magazine reloading capabilities.

Simple Takedown Concept
The Type III hard-coat anodized aluminium handguard for the Charger is CNC-milled, has a takedown block, and Magpul M-LOK compatible slots at 3, 6, and 9 o’clock for quick attachment of rails and attachments. The CNC-milled handguard has a handstop placed at the 6 o’clock position for safe hand placement.

Simple removal makes it possible to quickly separate the barrel/forend assembly from the action for simplicity in storage and transit. Verifying that the handgun is empty before pushing a recessed lever, twisting the subassemblies, and pulling them apart completes the straightforward takedown process. After takedown, this rig has no trouble holding zero.

A specially made tungsten dead-blow weight in its dead-blow action shortens bolt travel and lessens felt recoil and muzzle rise. The bolt’s heat-treated, chrome-moly steel construction guarantees strength, durability, and structural integrity. The receiver has a built-in Picatinny-style rail and is made of billet 7075-T6 aluminium that has undergone Type III hard anodizing. The receiver-mounted Picatinny-style rail is made to fit the majority of optics and mounts intended for use with Picatinny/MIL-STD 1913 rails, it should be noted. Optics and optic mounts that reach more than 0.275 inches below the top of the rail, however, may not fit the PC Charger due to the limited space between the top of the receiver and the bottom of the optics rail.

10/22 Continuity
If you are accustomed to a 10/22 trigger, the PC Charger’s feel won’t come as a surprise. The test gun’s trigger broke at 4.5 pounds and exhibited a tiny bit of creep and overtravel.

Both the mag release and the charging handle are reversible. To avoid snagging on the SB Tactical brace when folded, I kept the charging handle on the right side.

The heavy-contour barrel of a cold-hammer-forged chrome-moly steel barrel ensures constant accuracy, as we’ll discuss in a moment. The muzzle has a thread pattern of 12-28 TPI, which is typical for barrels used in 9mm pistols. If a suppressor is not tightly screwed after a long range session since it is right-hand threaded, it will come loose. It has a muzzle protector when it leaves the manufacturer.

One SR-Series pistol magazine and hex wrenches for disassembling the gun and removing the charging handle are included with this firearm.

Specs of the Ruger PC charger
Size: 9 mm
A 6.5-inch barrel
16.5 inches when folded, 25 inches when unfolded
9.2 inches tall with a 30-round magazine.
3.75 inches wide (folded)
5.94 pounds in weight
NASDAQ: Takedown

MPX SIG K
In terms of creativity and build quality, Sig’s MPX K meets high standards. The closed-bolt, short-stroke gas piston technology provided by the MPX K is extremely dependable and long-lasting. Like all MPXs, the K model is modular and suppressor ready, with a variety of handguard and barrel length options.

2019 marks the introduction of the Sig PCB folding brace, which enables the K to fold into an incredibly small size and function while it is folded. The K additionally has additional accessory rails in various lengths for suppressor coverage in addition to an upgraded M-Lok handguard.

The ultra-smooth, ultra-fast Timney single-stage trigger completes the K’s improvement. This trigger gives the Timney dependability shooters anticipate from the punishment a sub-gun weapon delivers because it was jointly designed by Timney and Sig.

Since it was first released, the Sig MPX series has seen significant development. The magazine layout and barrel retention mechanism have both undergone some changes. At least twice, the design of the bolt and bolt carrier was altered, and several sizes of barrel gas apertures were provided. Recoil springs and the firing pin arrangement of the MPX K are both third generation designs. Given that the gun used in this study has more over 1,200 rounds and handled abuse admirably, it appears that Sig has the K down pat.

A 4.5-inch cold hammer-forged barrel with a 1-in-10-inch twist is one of the K’s additional specifications. The M13.5x1mm left-hand threaded muzzle.

With a whole new arsenal of weaponry to try out and master, Modern Warfare 2 builds on the positive aspects of the first game. Which weapons are the greatest and which ones aren’t actually worth using? is a constant debate with each new Call of Duty game. Although it’s a difficult question, we’ll try to address it in this tutorial. The return of “League of Legends” to Malmö demonstrates why live esports events remain dominant. In Modern Warfare 2, you can experiment with a wide range of weaponry, from shotguns to sniper rifles. However, not all of them are equal, especially when you’ve equipped them with the greatest attachments and levelled them up. You should definitely use the top five Modern Warfare 2 weapons that we have chosen. The next page has a complete list of weapon tiers that ranks each weapon in the game. These are Modern Warfare 2’s top weapons, from the lightning-quick Fennec 45 to the dependable M4.

Best weapons in Modern Warfare 2

Five of Modern Warfare 2’s top weapons have been selected by our team. Give them all a shot; you won’t regret picking any of them!

M4

The M4 assault rifle is the first weapon discussed. To no one’s surprise, this is easily the greatest assault rifle currently available in Modern Warfare 2. It thrives by providing excellent stability at medium range, enabling you to either mount up and take players out from a distance or run and gun. Here are the top M4 attachments.

45 Fennec

In Modern Warfare 2, the Fennec 45 is quickly becoming the weapon of choice for those seeking to run an SMG. When configured properly, it enables lightning-quick movement and can be equipped with a 45-round magazine to assist you destroy adversaries without having to reload as frequently.

TAQ-56

Here is the TAQ-56. This weapon may be employed at close to medium ranges and is incredibly versatile. If you want to increase your speed, add a canted laser. If you want to increase your range, use a sight. You could want to combine the TAQ-56 with Dead Silence, which can really help you get the upper hand on your opponents, depending on the mode.

RPK

Although the RPK is an LMG in theory, with the right configuration, it may serve as an assault rifle. Furthermore, it is without a doubt one of the greatest weapons in Modern Warfare 2 for users of medium-range assault rifle builds. Here is how to configure the RPK.

SA-B 50

The SA-B 50 Marksman rifle is the next weapon. It can be configured to act as a run-and-gun, close-quarters weapon. This class’s ADS speed is so great that the rifle effectively feels like a shotgun, yet it can also occasionally pick out foes at middle range. When used with Quick Fix and Double Time, this gun performs best when you sprint across the maps eliminating foes with single shots. Visit our best SA-B 50 loadout guide for advice on how to configure it as a quickscoping threat.